Samsung-GT-I9305 Charging Problem လမ္းေၾကာင္းေလးပါ

Samsung-GT-I9305 Charging Problem Ways Solution Usb Ic Jumper

Samsung Galaxy S3 I9305 Charging Solution Jumper Usb Problem Ways

The picture below shows Samsung Galaxy S3 I9305 charging and usb components needs to check if the phone somehow doesn't charge if the wall charger is plug-in. But you may first ensure that the wall charger and the phone's battery you are using are still working. A drained battery will not charge, try to plug the battery charger around an hour or try to replace it with a good one, to quickly check if the battery got the problem.

So if you are experiencing any charging problem or problem connecting your Samsung GT-I9305 to your computer via USB cable then it is possible that your Samsung I9305 charging connector is faulty. Replacing it with a new one is the only solution here. But if by any chance the USB connector prints are broken then you have to make the jumpers as shown in the diagram below.

Here are Samsung Galaxy S3 I9305 USB Connector ways problem solutions. Please study these diagrams very carefully before you start repairing.To fix the device, you may start checking up the charging pin connector, make sure that its terminals are not bended or damaged. Clean it if necessary including the charging pin terminal contact pads on the PCB board.

If the above steps doesn't solved, check the FUSE, Coil, capacitor and the Diode, then replace if found damaged. If all these components seems all working OK, the next option will be is: Try to reheat, rework the Betty IC, these IC holds as a charging controller circuit. You may then try to replace it, if after reheating or reworking it doesn't solved the problem.

Track all these paths and components as shown in diagram above. all these tracks are given in different colors so that you can find out the jumper ways easily.

Samsung GT-I9305,Usb,Charging,Problem,Solution,Jumper,Ways

usb not charging, Usb not recognized, charging not save, not charging