Samsung-GT-I9305 Charging Problem Ways Solution Usb Ic Jumper
Samsung Galaxy S3 I9305 Charging Solution Jumper Usb Problem Ways
The
picture below shows Samsung Galaxy S3 I9305 charging and usb components
needs to check if the phone somehow doesn't charge if the wall charger
is plug-in. But you may first ensure that the wall charger and the
phone's battery you are using are still working. A drained battery will
not charge, try to plug the battery charger around an hour or try to
replace it with a good one, to quickly check if the battery got the
problem.
So if you are experiencing any charging problem or
problem connecting your Samsung GT-I9305 to your computer via USB cable
then it is possible that your Samsung I9305 charging connector is
faulty. Replacing it with a new one is the only solution here. But if by
any chance the USB connector prints are broken then you have to make
the jumpers as shown in the diagram below.
Here are Samsung
Galaxy S3 I9305 USB Connector ways problem solutions. Please study these
diagrams very carefully before you start repairing.To fix the device, you may start checking up the charging pin connector,
make sure that its terminals are not bended or damaged. Clean it if
necessary including the charging pin terminal contact pads on the PCB
board.
If the above steps doesn't solved, check the FUSE, Coil,
capacitor and the Diode, then replace if found damaged. If all these
components seems all working OK, the next option will be is: Try to
reheat, rework the Betty IC, these IC holds as a charging controller
circuit. You may then try to replace it, if after reheating or reworking
it doesn't solved the problem.
Track all these paths and components
as shown in diagram above. all these tracks are given in different
colors so that you can find out the jumper ways easily.
Samsung GT-I9305,Usb,Charging,Problem,Solution,Jumper,Ways
usb not charging, Usb not recognized, charging not save, not charging
